Throughline post

Guide · Recovery · Canon EOS and Cinema EOS

Canon video turned into a .DAT file? What it is and how to get it back

You stopped recording and nothing came back. Instead of an .MP4 there is a file ending in .DAT, the camera won’t play it and neither will your Mac. This is what a Canon camera, consumer Canon EOS or Cinema EOS, leaves when a recording is cut off before you press stop: a dead battery, a card pulled mid-take, or a freeze. Often the footage is still in that file. Throughline, a Mac app, can bring many of them back as a clip you can edit, written beside the original.

Start the 14-day free trial

macOS 26 or later · Apple silicon · every feature runs twice on your own footage

What a .DAT file is

A Canon camera, consumer Canon EOS or Cinema EOS, only finishes a clip when you stop recording normally. Finishing is what writes the part of the file a player needs to open it. If power goes first, the camera can leave the recording behind as a .DAT. On Cinema EOS cameras there is often a small .CPF file beside it.

In Canon’s community forum, consumer Canon EOS owners report .DAT files from the EOS R6, R6 Mark II, EOS M, Rebel T5i and 5D Mark IV, and most of those threads end without an answer.

Not every cut-off recording leaves one. In our tests, most battery pulls on the EOS R5 Mark II and EOS R6 Mark III left a clip that already plays. If yours plays, you are done.

Check the size first. A .DAT of 0 bytes holds no footage, and nothing can recover it. A .DAT that runs to hundreds of megabytes still holds data, and that is the one worth trying.

Do this first

  1. Stop using the card. Don’t record to it, and don’t format it, in the camera or on the computer.
  2. Copy the whole card to your Mac and work from the copy. Keep the original card until you have a clip that plays.
  3. Keep the .DAT and any .CPF beside it together, with their original names.
  4. Don’t rename the .DAT to .MP4 or .MOV, and don’t open it in other repair apps first. Renaming doesn’t fix it, and some tools write to the file they open.
  5. Find one clip that plays, shot on the same camera in the same recording mode (resolution, frame rate, codec). Ten seconds is enough.

How to recover it with Throughline

  1. Before you install anything, run the free check. It runs in your browser, nothing is uploaded, and it tells you whether the file looks recoverable. It doesn’t repair anything, and a good answer is not a promise.
  2. Download Throughline and start the 14-day trial. No card needed. It needs a Mac with Apple silicon on macOS 26 or later.
  3. Open Throughline, go to Repair and add the .DAT from your copy of the card.
  4. When it asks, give it the clip that plays from the same camera and mode.
  5. Before you run it, Throughline shows how likely the repair is to work. It then writes the recovered clip beside the original. The .DAT is never changed.
  6. On the trial, the export covers the first 60 seconds as a 720p proof with an overlay, so you can see it worked. A subscription exports the whole clip at full quality.

What comes back, by camera

CameraWhat it leavesStatus today
EOS R5 Mark II.DAT after a battery pull, H.264 with AAC soundProven on a real battery pull. Back as .MP4 with picture and sound.
Cinema EOS, XF-HEVCLarge .DAT, often with a .CPFProven on a real 39 GiB card. Picture and all four audio channels.
EOS R5, R6, R7, R8, R10, R50A file cut short by a copy or card transfer that stopped partwayProven for copies cut short. A .DAT from a battery pull on these bodies is not tested yet.
EOS R6 Mark II, R6 Mark III and other R bodies.DAT after a battery pullNot tested yet. Email us the camera and recording mode (no footage needed) and we’ll tell you honestly whether it’s supported.
Cinema EOS, XF-AVC (.MXF)VariesNot supported yet.
Camera RAW, including Cinema RAW Light (.CRM)VariesNot supported yet.

On bodies that record AAC sound, Throughline may return the picture only, and it tells you when it does.

What can’t be recovered

  • The last moment before the power went. The camera hadn’t written it yet.
  • A .DAT of 0 bytes. There is nothing in it.
  • Anything without a matching clip that plays from the same camera and mode.
  • Windows or Intel Macs. Throughline runs only on Apple silicon with macOS 26 or later.
Start the 14-day free trial

macOS 26 or later · Apple silicon · every feature runs twice on your own footage

Questions

Can I just rename the .DAT to .MP4?

No. Renaming changes the name, not what’s missing inside. In Canon’s forum, consumer Canon EOS owners report trying .MP4, .MOV and .MXF without luck. Work on a copy and leave the original alone.

Why is my .DAT 0 bytes?

The camera lost power before it wrote any footage to the card. A 0-byte file can’t be recovered by Throughline or anything else.

Will Throughline change my .DAT file?

No. The recovered clip is written beside it and the .DAT is left exactly as it was.

Do I need another clip from the same camera?

Yes. One clip that plays, shot on the same camera in the same recording mode. Ten seconds is enough.

Does every dead battery leave a .DAT?

No. In our tests, most battery pulls on the R5 Mark II and R6 Mark III left a clip that already plays.

My camera isn’t on the list. Is it worth trying?

Run the free check, then email us at [email protected] with the camera and recording mode. We’ll say plainly whether it’s supported. We don’t need your footage.

Is anything uploaded?

No. The free check runs in your browser and Throughline runs on your Mac. Your footage stays on your machine.

What does it cost?

The trial is free for 14 days with no card. After that, one subscription covers up to two Macs, and any charge is refundable within 14 days. The current price is on the homepage.

Related guides