Throughline post

Guide · Recovery · consumer Canon EOS

Recover a Canon EOS R5 Mark II .DAT file

When a consumer Canon EOS R5 Mark II loses power or the card comes out mid-recording, you sometimes find a .DAT file on the card instead of the clip, and nothing will open it. Throughline brings it back as an .MP4 with picture and sound, and writes the result beside the original, never over it.

Start the 14-day free trial

macOS 26 or later · Apple silicon · every feature runs twice on your own footage

What the .DAT file is

The R5 Mark II only finishes a clip when the recording stops normally. If the battery dies or the card is pulled first, it can leave a .DAT file behind. Editors will not open it, so the take looks lost. Usually it is not: the footage is in that file, in a form no editor reads.

Often there is nothing to fix at all. On most of the battery pulls we tested, the R5 Mark II left a clip that already plays. If yours plays, you are done.

Do this first

  • Stop using the card. Do not record to it again and do not format it.
  • Copy the card before you try anything. Work from the copy, and keep the original card untouched until you have the recovered file in hand.
  • Do not rename the .DAT or try to open it in another app first.

What Throughline does with it

Throughline is a Mac app for video work, and recovery is one of its jobs. Point it at the .DAT and it brings back the picture and the sound as an .MP4 you can open and edit. This was proven on a real battery pull from an R5 Mark II. The result is written next to the original; your .DAT is never modified.

Throughline may ask for one clip that plays, shot on the same camera in the same recording mode. If you shot anything else that day, you probably already have one.

What it cannot do

  • The moment the power went is gone. A battery pull always loses the last instant of the recording. You get everything up to that point.
  • Other R-series bodies are not tested yet. Throughline is proven on the consumer Canon EOS R5 Mark II, the EOS 5D Mark IV and EOS 7D, and Canon Cinema EOS XF-HEVC. For any other consumer Canon EOS or Cinema EOS camera, email [email protected] with the camera and recording mode (no footage needed) and we will tell you honestly whether it is supported.
  • Mac only. macOS 26 or later, Apple silicon.

Try it on your own file

The 14-day free trial runs every feature on your own footage, twice, with no card. Exports in the trial cover the first 60 seconds, and video it writes is a 720p proof with an overlay. That is enough to find out whether your file is one it can handle before you decide.

Start the 14-day free trial

macOS 26 or later · Apple silicon · every feature runs twice on your own footage

Questions

Will Throughline overwrite my .DAT file?

No. The recovered file is written beside the original. The .DAT is left exactly as it was.

Does every pulled card leave a .DAT?

No. On most battery pulls we tested, the EOS R5 Mark II left a clip that already plays. This page is for the times it leaves a .DAT instead.

Does this work on other Canon cameras?

Throughline is proven on the consumer Canon EOS R5 Mark II, the EOS 5D Mark IV and EOS 7D, and Canon Cinema EOS XF-HEVC. Battery pulls on other consumer Canon EOS R-series bodies are not tested yet; Email us the camera and recording mode, no footage needed, and we will tell you honestly.

Does this work on other cameras?

Yes. Throughline is proven on real files from cameras by Panasonic, Sony, Nikon, Fujifilm and DJI as well as the consumer Canon EOS bodies above, and the list keeps growing; the full list is on the homepage.

Related guides